Point-to-Point via Ethernet

4.7 / 5 mit 4.651 Stimmen

Free & non-binding point-to-point via Ethernet provider comparison

Point-to-Point via Ethernet
Site A
Site B
further Sites

All Ethernet Point-to-Point provider in one place

  • Colt
  • o2
  • Vodafone
  • BT
  • eunetworks
  • Riedel Networks
  • Telekom
  • Versatel
  • M-Net
  • Telstra
  • Telia Sonera
  • Cogent
  • NTT
  • Telekom Austria
  • AT&T

Benefits of Ethernet Point-to-Point at a glance

Security

The highest level of security and confidentiality for transmitting data via dedicated lines; the logical separation of the network stands for security on the infrastructure level. Optionally with additional encryption solutions for complying with statutory requirement.

Lower system price

Low investment costs (CapEx) – cost-savings by significantly less expensive hardware. Low operating costs (OpEx) – simplification of maintenance and administration using homogeneous technology

High availability

The standard, availabilities of 99.0% and can be expanded up to 99.99%. Binding, defined service levels (SLA) guarantee quality at the highest level for critical business applications.

Easy connection

Connection of the local networks via Ethernet interfaces without an additional router. Flexible bandwidth adjustment without additional investments in hardware.

Planning certainty

Fixed monthly costs and future-proof standards (no proprietary solutions).

Scalability

The bandwidth can be flexibly increased at any time and without replacing expensive routers.

LAN-LAN networking – networking made easy

SDSLNetworking company sites makes transferring data, exchanging information and communication easier, more flexible and faster.

By using Ethernet point-to-point connections, the local networks (LAN) of several sites are combined into a single logical network (WAN) without media breakage. The E line (Ethernet point-to-point) not only covers your current business requirements, but also allows you to flexibly react to future needs.

High availability, security and performance are the stand-out attributes of Ethernet technology.

The Savecall experts check the respectively available infrastructure worldwide.

Performance specifications of site networks via Ethernet

Speed

Presentation/Interface Connectors

2Mbps to 10 Mbit/s

10BASE-T/ 100BASE-TX RJ45

15Mbps to 100 Mbit/s

100BASE-T RJ45

150 Mbit/s s to 1Gbit/s

  • 1000BASE-LX single mode
    1310nm
  • 1000BASE-SX multi mode
    850nm
  • 1000BASE-T
  • LC, SC, FC/PC
  • LC, SC, FC/PC
  • RJ45

10Gbps

  • 10GBASE-SR multi mode 850nm
  • 10GBASE-LR single mode 1310nm
  • 10GBASE-ER single mode 1550nm
LC, SC, FC/PC

Connection bandwidth

  • 2.0M, 2.5M, 4M, 5M, 6M, 8M, 10M (copper)
  • 10M, 15M, 20M, 30M, 40M, 50M, 60M, 70M, 75M, 90M, 100M (glass)
  • 150M, 200M, 300M, 400M, 500M, 600M, 1G (glass)
  • 1G, 2G, 3G, 4G, 5G, 10G (glass)

Availability

  • up to 99.0% with (copper)
  • up to 99.50% with (glass)
  • up to 99.999% (glass back-up)

Maximum repair time

  • >=8 hours (copper)
  • >= 4 hours (fiber glass)
  • >= 2 hours (fiber glass + back-up)

Delay

  • 4-18 ms (copper)
  • 2-9 ms (glass)

Ethernet Frame Loss

  • ≤ 0.1% (copper)
  • up to ≤ 0.01% (glass)

Overview of all providers

Provider Product
telekom EthernetConnect
Colt LanLink
Cogent Ethernet Point-to-Point
bt Ethernet Connect
Vodafone EthernetBusinessService
 versatel VT ethernet, VT access
mnet M-net Connect-LAN
eunetworks Ethernet Services / E-Line
NTT Global e-VLAN Service
Telekom Austria A1 Ether Link
Telstra ETHERNET MAN
AT T Ethernet Services
O2 Network Point-to-Point
Telia Sonera ELAN
riedel Managed Ethernet Services

Prices for Ethernet point-to-point

Since the prices depend highly on the providers, availabilities, bandwidths and distances, only budgetary prices can be provided here.

Mbit/s

Ethernet (METRO)

Ethernet (NATIONAL)

Ethernet (INTERNATIONAL)

10

from 350 €

from 490 €

from 750 €

100

from 600 €

from 900 €

from 1,400 €

1,000

from 990 €

from 1,500 €

from 1,800 €

Back-up

Reliability option 1

  • Dual routing on the carrier backbone, control and replacement paths do not touch each other.
  • Completed with 1 demarcation device per end; availability usually >99.9%

Reliability option 2

  • Dual routing on the carrier backbone, control and replacement paths do not touch each other.
  • Dual supply to the customer building (dual entry)
  • Completed with 1 demarcation device per end; availability usually 99.99%

Reliability option 3 (node/edge disjointedness end end)

  • Dual routing on the carrier backbone, control and replacement paths do not touch each other.
  • Dual supply to the customer building (dual entry)
  • Completed with 2 demarcation devices per end; availability usually 99.999%

Ensures the highest level of protection a carrier infrastructure has to offer. Every carrier customer end device is placed in a fiber glass ring. This ensures a maximum 1+1 end-to-end reliability for the entire solution.

Ronald BalsRonald Bals

ICT Expert

Tel: +49 89 / 219 914 810
Email: datendienste@savecall.de
Also take a look at my Blog!

Customer testimonials

In cooperation with savecall ict solutions GmbH, we were able to develop a complete BCM organization concept.
Lubomir DrapkaAllianz Global Assistance Group
With Savecall, I have an optimal partner for reducing the costs of my leased line.
Marcel FriedbergIT Director
For more than 6 years, we have counted on the expertise of Savecall telecommunication consulting GmbH.
Florian Schwarzfinancial.com
We have already received very positive feedback from our customers regarding our new network services. With Savecall, have found a very reliable and competent partner.
Alexander HansenSatellite Office GmbH
The recommendation from Savecall was the perfectly integrated solution for our needs and is completely uncomplicated and flexible.
Hans-Michael SchaniaAurelius Capital Management GmbH
© 2014 Savecall Telecommunication Consulting GmbH