All Point-to-Point Network providers in one place
Point-to-Point Network for your company
Coupling two sites with a leased line for data exchanges shouldn’t be too difficult a challenge. Bandwidth requirements and the necessary line availability are defined and the connection technology (copper, leased line, glass, wireless local loop) and potentially necessary redundancy solutions (single-route, two-route, carrier and media redundancy) are derived from this. The costs for the leased line result in particular from the distance of the customer site to the closest PoPs (Point of Presence) of the carrier and potentially necessary primary product suppliers in addition to the carrier media used and the competitive intensity at the site.
The project has been completed and the solution is on order.
In practice, however, there are often greater challenges to face. The actual, desired connection technologies or media are not available at both sites. And often the same provider is not available. Redundancy solutions are either very expensive or seem impossible. Point-to-Point Network is far beyond the budget and a solution seems a long way off.
For our experts, this is a completely normal initial situation and not a reason for concern. We implement the right Point-to-Point Network for you. “On budget” and “on time” and often with providers and solution approaches that you hadn’t even heard of until now..
The experts from Savecall provide you with provider-independent and professional consultation regarding the products from all carriers, determine the services for you and take care of everything else. From the conclusion of the contract through to commissioning. At no cost to you.
Options for Point-to-Point Network
If your company is a small company with a few company sites located close to each other, a permanent digital connection (e.g. leased line) or a LAN-Link (point-to-point connection via Ethernet) may the right option for you. You lease a defined bandwidth and can select between transmission speeds from 2 MBit/s to nx1 GBit/s. You profit from secure and high-quality data transmission that is always available.
If your individual sites are not further than 20 km apart, they can be coupled in some cases using wireless local loops. However, setting up such a wireless local loop is connected to several planning, approval and installation expenses.
It is usually only used if your company sites are either directly next to each other with a line of site or are located in more remote areas where no suitable alternative infrastructure is available.
Point-to-point site networking providers at a glance
|VT ethernet, VT access|
|Ethernet Services / E-Line|
|Global e-VLAN Service|
|A1 Ether Link|
|Managed Ethernet Services|
In cooperation with savecall ict solutions GmbH, we were able to develop a complete BCM organization concept.
With Savecall, I have an optimal partner for reducing the costs of my leased line.
For more than 6 years, we have counted on the expertise of Savecall telecommunication consulting GmbH.
We have already received very positive feedback from our customers regarding our new network services. With Savecall, have found a very reliable and competent partner.
The recommendation from Savecall was the perfectly integrated solution for our needs and is completely uncomplicated and flexible.